Greenhouse Evaporative Air Cooling Pad for Hot Area
Cooling Pad& Fan System
The principle that water evaporation cools the air is introduced to the system and has widely used in the world. The air inside is drawn out by the fan, resulting in negative press; the hot and dry air becomes cool after passing the Cooling pad. The cool air then absorbs the heat inside and then drawn out by the fan. The temperature is at last reduced.
The cooling system includes Cooling pad, frame work and water recycling system, etc.
I -Cooling Pad
Height of ripple
1-Uses the new material and the spatial crossing linking technology, high absorbability, high water resistant, anti-mildew and long service life.
2- Large evaporation area, cooling efficiency as high as 80%.
3-The product involves surface active agent, absorb water naturally, fast speed of pervasion, lasting effectiveness. A piece of water can diffuse in 4-5 seconds. Height of absorb water: 60-70 mm/5 seconds, 200mm/1.5 hours, can achieve international standard.
4-Variety size of shape: Galvanized sheet, Stainless steel, Aluminum panel and so on, satisfy the needs of customers.
5-The product does not contain phenol which is irritant to the skin and the like chemical products. It is harmless while installation and using. It is safe, energy saving, environmental protective, economic and durable.
Air Flow m3/H
Framework: Hot Drip Galvanized steel
Impeller: Aluminum magnesium alloy
Net: Hot-drip Galvanized
Ⅲ- Water recycling system
·water pipes and spare parts
To make the Cooling Pad system operated in economic and stable way.
Installation and maintenance notice for cooling system in greenhouse application.
The water supply should cover the pad equally and trickle along the corrugated sheets. The water control can be realized by adjusting the valve.
Keep the water resource clean. The PH value should be between 6 – 9 and the electric conductance should be less than 1000 micro-ohm.
Clean the pool and water recycling system regularly to assure the cleanness of water supply system. (Usually once a week)
To maintain the good quality of the water supply to prevent alga and other microbe from spreading ,two measures can be adopted: put in 3-5ppm Chlorine or Bromine for short time treatment, or 1ppm for continuous processing.
Check whether water is over supply, pad is damaged, dilapidated on the edge or leaking at the connection. Using silicon glue to plug after water supply is stopped.
Longyoung Greenhouse Technology Co.,Ltd was founded in 2009 as the professional greenhouse manufacturer and contractor in China. And engaged in greenhouse design, engineering, production, erection and service.
Longyoung professional team is dedicated to continuously updating the design and technology of our greenhouse, based on the research of world trend, advanced technology in the world and customers feedbacks.
Our company has supplied different kinds of greenhouses to more than 40 countries around the world.
If you have any inquiry, pls feel free to contact us.